Salty Q&A: Should You Scrub New Live Rock?

Indiscriminately scrubbing live rock can destroy much of the life you paid for, and thus the benefit of doing so

Indiscriminately scrubbing live rock can destroy much of the life you paid for, and thus the benefit of doing so


Question

I’ll be receiving a shipment of live rocks in a few days, and I could use some advice on how to clean them up before putting them in my tank. Do I just need to give them a good going over with a scrub brush?” – Submitted by Chuck S.

Answer

I wouldn’t use the term “good going over” with respect to cleaning your new live rocks. Remember, you paid good money for the organisms encrusting those rocks, so you don’t want to scrub the entire surface of each rock indiscriminately.

Rather, what you want to do is very selectively scrub/scrape/pluck away any obviously dead/decomposing organisms, slimy films, unwanted algae, and clinging sediments or debris. Encrusting sponges that have been exposed to air will also need to be removed, as they’re likely to die and decompose. Otherwise, if a rock looks pretty “clean” and healthy right out of the box, all it needs is a good rinse.

Tools for the job include:

I generally clean each rock in a five-gallon bucket filled two-thirds to three-quarters of the way with salt water, give it a good swish in a second bucket of salt water to rinse once I’m satisfied all the undesirable stuff is gone, and then place it immediately in a heavy-duty plastic bin (also containing salt water, of course) for curing.

It’s a good idea to have several extra gallons of clean salt water handy during this process so you can drain off and refill the dirty buckets as well as top off the curing bin if needed to keep the rocks fully submerged.

If you wish and weather allows, you can do the cleaning and rinsing outside with the rocks spread out on a plastic tarp (out of direct sunlight), taking care to keep them moist by regular spritzing with a spray bottle filled with salt water. This step can make it easier to spot certain nasty hitchhikers that drop out of the rocks onto the tarp, such as crabs or mantis shrimps, but it’s not foolproof in this regard. (The nasties don’t always drop out!)

Also note that I mentioned the cleaned rocks are placed into a bin for curing. Even so-called “pre-cured” live rock will undergo some additional die-off of encrusting organisms, which can cause a deadly ammonia spike in an established system. So, unless you’re using the rocks to cycle a new system—which is a perfectly viable option, by the way—you’ll want this die-off to occur under controlled conditions in a separate container with heating and circulation provided.

Photo credit: Martin Carlin

Related posts:

SUBSCRIBE TO THE “SALT SMART” NEWSLETTER

If you enjoyed this post, subscribe to get our new posts in your email.
About Jeff Kurtz

Jeff Kurtz is the Co-founder/Editor of Saltwater Smarts, former Senior Consulting Editor for Tropical Fish Hobbyist Magazine, and the aquarist formerly known as “The Salt Creep.” He has been an aquarium hobbyist for over 30 years and is an avid scuba diver.

Comments

  1. These days I don’t think live rock is even a necessity anymore with all these bacterial additives available to seed the system. I personally just upgraded my 90 gallon to a 120 and reused the rocks but I didn’t want any of the possible pests to be be transferred over. So a vinegar/Bleach/ Baking soda/ Freshwater bath was done on each and every rock. Sure this kills everything but it opens up all the pores that were saturated over the last 16 years. This eliminated any locked in phosphates and nitrates in the rocks. Since the system is plumbed all together the seeding process is easier.

  2. This is a very informative article. I always prefer a scrub brush for cleaning the live rock. Or, I can keep the rock on a plastic sheet and spray tank water from time to time. Sometimes I used baking soda on each and every rock.

Leave a Reply to Jeff Kurtz Cancel reply

*